iv
■
Intended Usage
The meter is designed for:
●
Measuring natural or articial lights to display the various readings for photography
and motion picture.
●
Displaying the correction values of lters for camera or lighting to match to the
target color temperature.
●
Managing the aged deterioration of light sources.
●
Managing the light source for viewing printed color proofs.
●
Checking the color rendering properties of a light source.
Main features of the C-800
Usage Features
Lighting control
for still and motion
capture
●
Measure all lights (LED, HMI, Tungsten, Fluorescent lamp,
natural light and ash light) with the bandwidth from 380nm to
780nm.
●
Display the various color rendering properties such as CRI, SSI,
TLCI, TLMF, and TM-30-15.
●
Display the enhanced measurement units.
(1) Color temperature
(K= Kelvin
)
(2) Color deviation ( uv)
(3) LB/CC index
(4) LB/CC Camera lter number (KODAK WRATTEN 2, FUJIFILM,
LEE)
(5) LB/CC Light lter number (LEE, ROSCO)
(6) Illuminance/luminous exposure (ambient light/ash light)
(7) TM-30-15 (Rf, Rg)
(8) SSI (comparison with known standards or memorized value)
(9) CIE1931 chromaticity (x, y)
(10) Hue/Saturation
(11) CRI (Ra, R1 to R15)
●
Various Display modes
(1) Text mode
(2) Spectrum graph/comparison mode
(3) CRI/comparison mode
(4) TM-30-15 mode
(5) SSI mode
(6) TLCI/TLMF mode
(7) Filter (Camera/Light) mode
(8) Multi Lights mode
(9) White balance correction mode
To Next Page
Loading...
