Sekonic SPECTROMASTER C-800 - Displaying in Color Rendering Index [CRI] Mode

43
4. Basic Operations
4-4-4 Displaying in Color Rendering Index [CRI] Mode
Displays the selected average CRI (Ra) or individual CRI (R1 ~ R15) numerically.
Each CRI is also displayed in a graph.
Operation
1.
Touch the [CRI] icon on the Display Mode Selection screen.
The CRI screen will be displayed. (

P30)
2.
Touch the [Measuring Mode] icon.
The Measuring Mode Selection screen will be displayed. Select the desired
Measuring mode to use. (

P22)
3.
Press the Measuring Button ❺ to measure.
The Light Selection Ring
❷
should be set to L ( )
when taking ambient light measurements.
When measuring ash units, select Range L ( )
or Range H ( ) depending on the brightness of
the ash. (

P99,

P101)
Measurements are now displayed.
C-800
Light Selection Ring
❷
Measuring Button
❺
Measurement Value
Display Area
Graph Display Area
Displays CRI in horizontal
graph
[Display Item] Indication
[Measuring Mode] Icon
[Display Mode] Icon
CRI Mode
CRI Screen