Sekonic SPECTROMASTER C-800 - Page 56

44
4. Basic Operations
NOTE
●
Graph display areas Ra, R1 to R15 are always displayed.
●
Measurements and display will take longer in light levels below 30lx. The
LCD illumination will normally switch off during measurements to avoid
inuence to measurements.
●
Ra is the avaraged value from R1 to R8 only. R9 to R15 are not included in the Ra.
4.
Touch the [Display Item] indication to change.
The Display Item Library screen will be displayed.
5.
Touch the desired Display Item.
Select the item to display above the graph.
Indication will be encircled in blue.
6.
Touch the [OK] button.
Conrms the setting and returns to the CRI screen.
To cancel the setting, touch the [Cancel] button.
7.
Memorize the measurement results.
To record only current measurements, press Memory Button
❼
. (

P106)
[Display Item]
Indication
Display Item LibraryCRI Screen
CRI ScreenDisplay Item Library
[Display Item]
Indication
[OK] Button [Cancel]
Button