40
4. Basic Operations
NOTE
Measurements and display will take longer in light levels below 30lx. The LCD
illumination will normally switch off during measurements to avoid inuence to
measurements.
4.
The current measurement is displayed at the top of display area
with rainbow colored spectrum graph.
5.
Touch the [Memory Selection] icon.
The [Spectrum Comp. Memory Recall] screen will be displayed.
If no measurements have been memorized, a the pop-up screen appears to
indicate no memorized value.
After you conrmed the message "No memorized value.", touch the [Close] button.
Returns to the Spectrum Comp. screen.
After memorizing several values, select the memorized value again.
Memory Selection Pop-up Screen
Current
Measurement
[Memory
Selection] Icon
Spectrum Comp.
Memory Recall Screen
Spectrum Comp.
Screen
Memory
Selection
Area
To Next Page
Loading...
