Sel SEL-734B - Read Settings from the SEL-734 B; Save Configuration Settings to the PC Hard Drive; Figure 5.1 Quickset Prompt to Read Settings Groups

5.2
SEL-734B Capacitor Bank Control Field Reference Guide Date Code 20170207
Working With the SEL-734B Design Template Settings
Read Settings From the SEL-734B
Read Settings From the SEL-734B
The SEL-734B enclosure models are shipped with the design template loaded.
Read the settings from the SEL-734B prior to changing the settings by
performing the following steps:
Step 1. Establish communications with the SEL-734B.
Step 2. Click File > Read to read meter configuration settings.
ACSELERATOR QuickSet
®
SEL-5030 Software prompts you to
select the settings groups and classes to read, as shown in
Figure 5.1.
Step 3. Check the box titled Read Designer Template from Device.
QuickSet automatically checks all of the settings groups and
classes.
Step 4. Click OK.
QuickSet will read the design template from the SEL-734B, then open the
settings file in the design template viewport.
Figure 5.1 QuickSet Prompt to Read Settings Groups
Save Configuration Settings to the PC Hard Drive
Step 1. Click File > Save As to save the active settings to an rdb
database.
Step 2. Select or create a new database.
Step 3. Name the settings file.
Step 4. Click OK to save the settings to the database selected.