Sennheiser G4-A - Connectors on the Rear of the Device

Installing the AC 41
36
Connectors on the rear of the device
1 RF OUT BNC socket
• Antenna output
• See “Connecting antennas”
2 RF IN 1 to RF IN 4 BNC sockets
• Antenna input with DC OUT
• See “Connecting the AC 41 with transmitters”
3 DC INsocket
• To connect the NT 3-1 power supply unit
• See “Connecting/disconnecting the AC 41 to/from the power supply
system”
4 Strain relief for the cable of the power supply unit
• See “Connecting/disconnecting the AC 41 to/from the power supply
system”