SICK CLV 421 User Manual

Operating Instructions Chapter 10
CLV 42x bar code scanner
Appendix
8 009 981/O078/16-08-2004 © SICK AG · Division Auto Ident · Germany · All rights reserved 10-41
10.13 Supplementary documentation
10.13.1 CLV Connect (from version 1.9)
Diagramms showing you how to connect the CDB 420 and CDM 420 Connection Modules
are also available in the “CLV Connect“ PC program. This software is available on the
“Manuals & Software“ CD, which is included in the scope of delivery of the ICR.
The software can also be downloaded from the SICK home page (www.sick.de) at
“Service&Support/Downloadpool“. It can be called up using a standard HTML browser
(e. g. Internet Explorer
TM
).
Part No. Title Language Contents
8 010 001 “CDB 420 Connection Module“
Operating Instructions
German/
English
Description for connecting the CLV to the host/PLC/sensor via
the
CDB 420 Connection Module
8 010 004 “CDM 420 Connection Module“
Operating Instructions
German/
English
Description for connecting the CLV to the host/PLC/sensor via
the
CDM 420 Connection Module
8 010 002 “CMC 400 Connection Module Cloning“
Operating Instructions
German/
English
Description for setting up the module in the CDB 420 or
CDM 420 Connection Module
8 010 372 “CMD 400 Connection Display Module“
Operating Instructions
German/
English
Description for setting up the module in the CDM 420
Connection Module
8 010 365 “CMP 400 Power Supply Module“
Operating Instructions
German/
English
Description for installing the module in the CDM 420
Connection Module
8 010 462 “CMF 400-1x01 Field Bus Gateway
for Profibus-DP“
Operating Instructions
English Description for installing and setting up (configuration) the
module in the CDM 420 Connection Module
8 010 464 “CMF 400-2101 Field Bus Gateway
for DeviceNet“
Operating Instructions
English Description for installing and setting up (configuration) the
module in the CDM 420 Connection Module
8 010 735 “CMF 400-2101 Field Bus Gateway
for Ethernet TCP/IP“
Operating Instructions
English Description for installing and setting up (configuration) the
module in the CDM 420 Connection Module
8 009 180 “Application of the CAN interface“
Operating Instructions
English Description of building a CAN scanner network (electrical
connection, configuration of the CLV, functions) and the
integration into a CANopen network.
On request Commando strings English Description of the CLV command strings
Table 10-13: Supplementary documentation

SICK CLV 421 Specifications

General

Brand	SICK
Model	CLV 421
Category	Barcode Reader
Language	English