SICK CLV 421

Chapter 6 Operating Instructions
CLV 42x bar code scanner
6-24 © SICK AG · Division Auto Ident · Germany · All rights reserved 8 009 981/O078/16-08-2004
Operation
The code number "15000" means that the self-test was completed successfully and that
no faults were diagnosed.
Chapter 8.3 Error messages, Page 8-2, lists the error key
together with the associated corrective measures.
6.5.10 Performing device functions of the CLV in the dialog box
CLV Setup enables a number of CLV functions to be executed interactively. CLV Setup
prompts the user to carry out specific actions and provides information on the progress of
the function being executed.
The following functions are available:
• AutoSetup
• Match code Teach-in
• Show CP-limits
• Adjusting mode
• Analyze scanner network (only if the CAN interface is used)
• Activate factory defaults in device
 In the menu bar, select the desired function from CLV 42X, DEVICE FUNCTIONS.
– or –
Press the [F2] key.
The DEVICE FUNCTIONS dialog box is then displayed.
Select the desired function from the EXECUTE menu. CLV Setup starts the function and,
where appropriate, prompts the user to carry out the necessary action.
Fig. 6-11 shows an example of the dialog box that appears after AutoSetup has been
started.
Fig. 6-11: CLV Setup: dialog box for AutoSetup execution