SICK DUSTHUNTER T User Manual

22 GMS800 · Operating Instructions · 8013025 V1.2 · © SICK MAIHAK GmbH
Installation
Subject to change without notice
3.1 Scope of delivery
3.2 Installation/project planning guideline
Basics
Required installation work
Additional installations as required
Item Scope of delivery
Device Gas analyzer, complete
Further device components - depending on scope of order
Documentation Operating Instructions
Further documents - depending on device version (
→ p. 12, §1.6)
Accessories
→ Supplementary Operating Instructions for Enclosure
NOTICE:
b Always pay primary attention to the individual information provided.
Gas connections are sealed off with plugs to protect the internal gas path from
contamination, liquids and condensation.
b Recommendation: First remove these plugs when connecting the gas lines.
Prerequisites at the installation location
→ Supplementary Operating Instructions for
Enclosure
Ambient conditions
Gas connection details
b Assemble/fit enclosure
→ Supplementary Operating Instructions for
Enclosure
b Prepare mains connection → p. 26, §3.4
b Connect mains connection
→ Supplementary Operating Instructions for
Enclosure
b Make gas connections → p. 23, §3.3
b Setting up automatic test gas feed → p. 25, §3.3.6
b Using signal connections → p. 27, §3.5
Proper installation meeting application requirements is the prerequisite for
correct device functions and measuring results.
b Recommendation: Allow qualified skilled persons to plan and carry out
installation.

SICK DUSTHUNTER T Specifications

General

Brand	SICK
Model	DUSTHUNTER T
Category	Measuring Instruments
Language	English