Operating Instructions FLOWSIC100
Gas Velocity Monitor
Assembly and Installation
88012513/03-2008 © SICK MAIHAK GmbH · Germany · All rights reserved 77
Installing the Optional Purge-air Reducer Set
If necessary, connect a purge-air reducer (see Section 2.3.6) as shown in Fig. 3.21.
Fig. 3.21: Installing a purge-air reducer
Reducer
approx. 200 mm
Purge-air hose to sender/
receiver unit
Hose connection
Purge-air unit
Clamping tape
To Next Page
Loading...
