6 COMMISSIONING
8017768/12AX/2019-05-31|SICK
OPERATING INSTRUCTIONS | TIC
Subject to change without notice
5. Click Assign Device. The sensor is assigned to the LMS Width system component.
In the list of devices, the 2D LiDAR sensor now appears with a green background.
The green background color indicates that the assigned device belongs to the current
component. The devices yet to be assigned are still blue.
Accidentally assigning the LMS Width to an LMS Length is prevented by the system.
6. Once the change has been made, click Close.
The device search closes. The red circle containing the error number has now
disappeared from both LMS Width listings.
7. Apply the same process when assigning devices for the two 2D LiDAR sensors to the
LMS Length system components. Start again with the system component of the
TIC102 Slave 2 system function.
All red error numbers must have disappeared by the end.
Note
To Next Page
Loading...