COMMISSIONING 6
8017768/12AX/2019-05-31|SICK
Subject to change without notice
OPERATING INSTRUCTIONS | TIC
Running device search
1. Go to the level of the LMS Axle system component and click the Start device search
magnifier icon.
2. Click the Device Search button. The devices connected to the Traffic Controller appear
in the list.
3. Change the IP address of the sensor and confirm with Prepare device.
4. Click Assign device in the LMS Axle with the correct IP address. The sensor is assigned
to the LMS Axle system component. In the list of devices, the 2D LiDAR sensor now
appears with a green background.
5. Click Close. The device search closes.
To Next Page
Loading...