Quick Guide
S7-300 Programmable Controller Hardware and Installation
2-4 A5E00105492-01
2.2 Quick Guide: Installation
In this Quick Guide
In this Quick Guide we show you the basic procedures for configuring, mounting,
wiring and networking your SIMATIC S7 system, modules and module racks.
How to successfully install a SIMATIC S7 system
Install an S7 system as follows:
Configuration
Installation
Wiring
Address
Installation completed,
continue with commissioning
Yes
No
Should
a subnet
be created?
Network
Figure 2-1 Installing a SIMATIC S7 system
Basic rules
In view of the many and versatile applications of an S7 system, this chapter can
only cover the basics on its electrical configuration. You must keep at least to these
basic rules if you want your S7 system to operate free of trouble.