Siemens LMV36.520A1 - Backup and Restore Operations

159/248
Building Technologies Division Basic documentation LMV36... CC1P7544en
Infrastructure & Citiies Sector 23 Operating the AZL2... unit 25.09.2013
23.6 Backup / restore
Using the AZL2, the settings made on the basic unit can be stored (backup) and then
transferred back to the basic unit at a later point in time.
Creating a backup data set
No. Parameter
050.0 Index 0: Creation of backup
The following parameters can be used to read information about the backup data set:
No. Parameter
055 Burner identification of the AZL2 backup data set
056 ASN extraction of the AZL2 backup data set
057 Software version used when creating the AZL2 backup data set
Restoring a backup data set
To transfer a backup data set back to the basic unit, the parameter must be set to 1.
No. Parameter
050.1 Index 1: Execute restore