Siemens LMV36.520A1 - Operation of Basic Unit via AZL2...; Normal Display and Standby Mode; Startup;Shutdown Display

164/248
Building Technologies Division Basic documentation LMV36... CC1P7544en
Infrastructure & Citiies Sector 24 Operation of basic unit via the AZL2... 25.09.2013
24 Operation of basic unit via the AZL2...
24.1 Normal display
Normal display is the standard display in normal operation, representing the highest menu level. From the
normal display, you can change to the info, service or parameter level.
24.1.1 Display in standby mode
P
Vh
mi n
s%
Bild 9/0707
Unit is in standby mode.
Note
OFF flashes when the Manual OFF function, the manual
output, or controller OFF is activated.
24.1.2 Display during startup / shutdown
24.1.2.1. Display of program phases
P
Vh
mi n
s%
Bild 10/0707
The unit is in phase 22. The controller calls for heat. The
bar below the
symbol appears. The individual program
phases and controlled components are displayed in
accordance with the program sequence.
24.1.2.2. Display of program phase with remaining running time until end of the phase is reached
P
V
h
mi n
s
%
Bild 11/0808
The unit is in phase 30 and shows the remaining running
time in that phase.
Example: 12 s, phase 30