Siemens LMV36.520A1 - Burner Identification; Number of Startups Resettable

173/248
Building Technologies Division Basic documentation LMV36... CC1P7544en
Infrastructure & Citiies Sector 26 Info level 25.09.2013
26.2.3 Burner identification
P
Vh
mi n
s%
Bild 32/0707
The display shows parameter 113: flashing on the
left, characters ._._ on the right.
Example: 113: ._._
/
reset
1…3 s
P
Vh
mi n
s%
Bild 33/0707
Press
/
reset
for 1…3 s to show the burner’s
identification.
Default setting: - - - - - - - -
Example: 3
/
reset
or
ESC
P
Vh
mi n
s%
Bild 32/0707
Press
/
reset
or
ESC
to return to the display of
parameters.
The burner’s identification can be set on the parameter level!
To the next parameter
Back to the previous
parameter
26.2.4 Number of startups resettable
P
V
h
min
s%
Bild 34/0707
The display shows parameter 164: flashing on the
left, characters ._._ on the right, since display of
the number of startups may comprise more than 5
digits.
Example: Parameter 164: ._._
/
reset
1…3 s
P
Vh
mi n
s%
Bild 35/0707
Press
/
reset
for 1…3 s to show the number of
startups (resettable).
Example: 36
/
reset
or
ESC
P
V
h
min
s%
Bild 34/0707
Press
/
reset
or
ESC
to show parameter 164
flashing again.
The number of startups can be reset on the parameter level!
To the next parameter
Back to the previous
parameter