176/248
Building Technologies Division Basic documentation LMV36... CC1P7544en
Infrastructure & Citiies Sector 27 Service level 25.09.2013
27.2 Display of service values (example)
27.2.1 Number of faults
P
Vh
mi n s %
Bild 40/0707
The display shows parameter 161: flashing on
the left, the number of faults that occurred thus
far on the right 0.
Example: Parameter 161: 0
To the next parameter
or
reset
<1s
Back to the previous
parameter
27.2.2 Error history
Refer to chapter Parameter with index, without direct display/Example of parameter 701: Error history!
Note
Can be deleted for service (refer to chapter Parameter list)!
27.2.3 Intensity of flame
P
Vhmins%
Bild 41/0707
The display shows parameter 954: flashing on the
left.
On the right, the flame’s intensity is displayed as
a percentage.
Example: 954: 0.0
To the next parameter
or
reset
<1s
Back to the previous
parameter
Note
Also refer to chapter Intensity of flame during curve settings.
27.2.4 End of service level
P
Vh
mi n
s%
Bild 38/0707
When this display appears, you have reached the
end of the service level.
Display – End – appears flashing.
To the start of the service
level
Back to the previous
parameter
ESC
P
Vh
min
s%
Bild 22/0707
Press
ESC
to return to the normal display.
OPErAtE appears for a short moment.
P
Vh
mi n
s%
Bild 9/0707
When this display appears, you are back on the
normal display and you can change to the next
level mode.
To Next Page
Loading...
