63/248
Building Technologies Division Basic documentation LMV36... CC1P7544en
Infrastructure & Citiies Sector 7 Basic unit 25.09.2013
In dual-fuel operation, the parameters 325...399 are assigned to fuel 1.
No. Parameter
325 Fuel 1 gas: Prepurge time
326 Fuel 1 gas: Preignition time
327 Fuel 1 gas: Safety time 1 (TSA1)
329 Fuel 1 gas: Time to respond to pressure faults within safety time 1 (TSA1) and
safety time 2 (TSA2)
330 Fuel 1 gas: Interval 1
331 Fuel 1 gas: Safety time 2 (TSA2)
332 Fuel 1 gas: Interval 2
333 Fuel 1 gas: Afterburn time
334 Fuel 1 gas: Postpurge time (no extraneous light test)
342 Fuel 1 gas: Valve proving evacuation time
343 Fuel 1 gas: Valve proving time test atmospheric pressure
344 Fuel 1 gas: Valve proving filling time
345 Fuel 1 gas: Valve proving time test gas pressure
346 Fuel 1 gas: Waiting time gas shortage
348 Fuel 1 gas: Postpurge time 3 (abortion if load controller On)
365 Fuel 1 oil: Prepurge time
366 Fuel 1 oil: Preignition time
367 Fuel 1 oil: Safety time 1 (TSA1)
369 Fuel 1 oil: Time to respond to pressure faults within safety time 1 (TSA1) and
safety time 2 (TSA2)
370 Fuel 1 oil: Interval 1
371 Fuel 1 oil: Safety time 2 (TSA2)
372 Fuel 1 oil: Interval 2
373 Fuel 1 oil: Afterburn time
374 Fuel 1 oil: Postpurge time (no extraneous light test)
384 Fuel 1 oil: Postpurge time 3 (abortion if load controller On)
Caution!
The OEM or the heating engineer must make certain that the times conform to
the standards covering the respective type of plant.
To Next Page
Loading...
