Siemens MICROMASTER 440 - Page 271

Issue 10/06 5 MICROMASTER 440 specifications
MICROMASTER 440 Operating Instructions
6SE6400-5AW00-0BP0
271
Input voltage range 3 AC 380 V – 480 V ± 10 %
(Unfiltered)
Order No. 6SE6440- 2UD38-8FA1 2UD41-1FA1 2UD41-3GA1 2UD41-6GA1 2UD42-0GA1
[kW] 90 110 132 160 200
Output Rating (CT)
[hp] 125 150 200 250 300
Output Power [kVA] 145.4 180 214.8 263.2 339.4
CT Input Current 1) [A] 169 205 245 297 354
CT Output Current [A] 178 205 250 302 370
VT Input Current 1) [A] 205 245 297 354 442
VT Output Current [A] 205 250 302 370 477
[A] 250 315 400 450 560
Recommended Fuse
3NE 1227-0 1230-0 1332-0 1333-0 1435-0
Pipe cable shoe to
DIN 46235
[mm] 10 10 10 10 10
[mm
2
] 1 x 95 or
2 x 35
1 x 150 or
2 x 50
1 x 185 or
2 x 70
1 x 240 or
2 x 70
2 x 95
Input Cable Min.
[awg] or
[kcmil]
1 x 4/0 or
2 x 2
1 x 300 or
2 x 1/0
1 x 400 or
2 x 2/0
1 x 500 or
2 x 2/0
2 x 4/0
[mm
2
] 1 x 185 or
2 x 120
1 x 185 or
2 x 120
2 x 240 2 x 240 2 x 240
Input Cable Max.
[awg] or
[kcmil]
1 x 350 or
2 x 4/0
1 x 350 or
2 x 4/0
2 x 400 2 x 400 2 x 400
[mm
2
] 1 x 95 or
2 x 35
1 x 150 or
2 x 50
1 x 185 or
2 x 70
1 x 240 or
2 x 70
2 x 95
Output Cable Min.
[awg] or
[kcmil]
1 x 4/0 or
2 x 2
1 x 300 or
2 x 1/0
1 x 400 or
2 x 2/0
1 x 500 or
2 x 2/0
2 x 4/0
[mm
2
] 1 x 185 or
2 x 120
1 x 185 or
2 x 120
2 x 240 2 x 240 2 x 240
Output Cable Max.
[awg] or
[kcmil]
1 x 350 or
2 x 4/0
1 x 350 or
2 x 4/0
2 x 400 2 x 400 2 x 400
[kg] 110 116 170 174 176
Weight
[lbs] 242 256 375 384 388
1) Secondary conditions: Input current at the rated operating point - applies for the short-circuit voltage of the line
supply V
k
≥ 2.33 % referred to the rated drive converter power and a rated line supply
voltage of 400 V without line commutating reactor.