Siemens SCALANCE X-200

Menus in the WBM
5.3 The Agent menu
SCALANCE X-200
Configuration Manual, 03/2015, C79000-G8976-C285-06
113
Services
Enable the services via which the device may be accessed.
Ports
Enable the ports via which the device may be accessed.
Syntax of the Command Line Interface
Table 5- 27
Management ACL - CLI\AGENT\MACL>
Command
Description
Comment
info Displays the current settings of the manage-
ment ACL.
add [IP address] [Subnet
Mask]
Creates a new entry in the management ACL. Administrator only
delete [IP address] [Subnet
Mask]
Removes an entry from the management ACL. Administrator only
ports [IP address] [Subnet
Mask] <E|D> [port]
Specifies the ports via which the device may be
accessed.
Administrator only
services [IP address] [Subnet
Mask] <E|D> [service]
Specifies the protocols that can be used to
access the device.
Administrator only