Menus in the WBM
5.1 The System menu
SCALANCE X-200
62 Configuration Manual, 03/2015, C79000-G8976-C285-06
Event log
System Event Log Table
This page shows which events occurred and when. You can save the event table using
HTTP or TFTP in the System menu.
You specify the events that are to be logged in the "Agent > Event Config" dialog.
events occurring in quick succession are not always displayed in the causal
Figure 5-9 System Event Log Table
Specifies the device restart after which the relevant event occurred.
Shows the operating time of the device since the last restart.
To Next Page
Loading...
