Connection to PROFINET IO
7.3 Configuring the topology in STEP 7
SCALANCE X-200
Configuration Manual, 03/2015, C79000-G8976-C285-06
161
Configuring the topology in STEP 7
Procedure
1. Call the dialog box with port-specific settings. To open the dialog, select the device whose
settings you want to change. In the lower half of the station window, there is a detailed
view of the selected device.
2. Double-click on the required port to open its properties dialog. As an alternative, the
properties dialog can also be opened by right-clicking on the relevant port and selecting
the "Object Properties" entry from the context menu.
3. Then select the "Topology" tab.
Figure 7-1 STEP 7 HW Config dialog box, "Topology" tab
To Next Page
Loading...
