Menus in the WBM
5.3 The Agent menu
SCALANCE X-200
Configuration Manual, 03/2015, C79000-G8976-C285-06
87
Syntax of the Command Line Interface
Table 5- 17 Agent Trap Configuration - CLI\AGENT\TRAP>
Shows the trap configuration table.
traps [E | D] Enables / disables traps. Administrator only
settrap <entry> <IP> <E | D> Enables / disables the trap IP address to be
Administrator only
SNMP Groups
SNMP Configuration Groups
On this page, you create or delete user groups for device access using SNMPv3. You can
decide whether or not members of a group need to authenticate themselves, whether they
communicate with encryption and whether they have read and write permissions.
Figure 5-19 SNMP Configuration Groups
To Next Page
Loading...
