Siemens SCALANCE X-200

SCALANCE X-200
Configuration Manual, 03/2015, C79000-G8976-C285-06
173
MIBs for X-200
A
A.1
Important MIB variables
Important MIB variables in the MIB II standard
Below, you will find a list with some of the SNMP variables from the MIB II set for monitoring
device status. MIB II describes all the SNMP variables that are usually supported by all
SNMP-compliant devices.
Variables in the System directory
Variables
Access rights
Description
sysDescr Read only A string with up to 255 characters is used. This value contains the manufacturer's device
ID.
sysObjectID Read only The address (object identifier) used to access device-specific SNMP variables is output
here: 1.3.6.1.4.1.4196.1.1.5.2.nnn.mmm
sysUpTime Read only Time since the last reset (for example, after power up). The value is shown in hundredths
of a second.
sysContact Read and write. A contact person can be entered here (default: empty string). Possible value: string with a
maximum of 255 characters.
sysName Read and write. A name for the device can be entered here (default: empty string). Possible value: string
with a maximum of 255 characters
sysLocation Read and write. The device location can be entered here (default: empty string). Possible value: string with
a maximum of 255 characters.
sysService Read only Shows the functions (services) provided by the component according to the ISO/OSI mod-
el. Level functionality:
1. Physical (for example repeater)
2. Datalink/subnet (for example bridges, switches)
3. Internet (for example IP gateways, routers)
4. End to end (for example IP hosts)
5. -
6. -
7. Applications (for example e-mail servers), data type: 32-bit integer