Configuration using WBM and CLI
4.1 Web Based Management
SCALANCE X-200
42 Configuration Manual, 03/2015, C79000-G8976-C285-06
Operator activities
Top menu bar
The top menu bar of the WBM contains 3 menu commands:
● Console
If you click this menu command, a console window opens. In this window, you can enter
CLI commands. You are then connected to the switch over a TELNET connection.
To do this, a standard program must be specified for TELNET connections in your
operating system or in your browser.
● Support
If you click this menu command, an Internet connection to the support pages of
SIEMENS AG is established. This is only possible when the PC supports an Internet
connection.
● Logout
If you click this menu command, you will log out from the WBM of the IE switch.
Updating the display with the "Refresh" button
WBM pages have a "Refresh" button at the lower edge of the page. If you want to request
up-to-date information from the IE switch for the current page, click this button.
Storing entries with the "Set Values" button
Note
It is only possible to
change the configuration data if you log on with the "admin" user name.
WBM pages in which you can make configuration data settings have a "Set Values" button at
the lower edge. Click this button to store configuration data you have entered on the IE
switch.
Blue text entries are linked
If you click the blue text, you automatically go to the linked page.
To Next Page
Loading...
