Menus in the WBM
5.1 The System menu
SCALANCE X-200
54 Configuration Manual, 03/2015, C79000-G8976-C285-06
Here, you can save the GSDML file of the IE Switch X-200 in a file.
Note
The private key and the certificate for SSL are required to allow the user to communicate via
a secure connection with
the Web server on the IE Switch X-200.
The files must be available in PEM format.
Save & Load TFTP
System Save & Load TFTP
The WBM allows you to store configuration information in an external file on a TFTP server
or to load such data from an external file from the TFTP server to the IE Switch X-200.
You can also load new firmware from a file located on the TFTP server. You can make the
entries required for this on the page of the System Save & Load TFTP menu.
Figure 5-5 System Save and Load via TFTP
The IP address of the TFTP server with which you want to exchange data.
To Next Page
Loading...
