Siemens SCALANCE X-200

Menus in the WBM
5.3 The Agent menu
SCALANCE X-200
92 Configuration Manual, 03/2015, C79000-G8976-C285-06
5.3.8
SNMP Users New Entry
Agent SNMP Configuration User Table
Click the "New Entry" button on the SNMP User Table page. The page shown below
appears. Here, you can create a new SNMPv3 user:
Figure 5-22 SNMP User Table - new entry
User Name
Enter the name of the user you want to create here.
Group Name
Here, you select the SNMPv3 user group to which the user you are creating will be assigned.
Authentication Algorithm
Here, you select the authentication method that the user will use.
Authentication Password/Password Confirmation
Here, you enter the password with which the user you are creating will log on with the IE
switch for SNMPv3 communication.
Privacy Password/Password Confirmation
Here, you specify the password that the user will use for encryption of SNMPv3
communication.