SCALANCE X-200
Configuration Manual, 03/2015, C79000-G8976-C285-06
3
Purpose of the Configuration Manual
This manual supports you when configuring the SCALANCE X-200 Industrial Ethernet
switches. It outlines the technical options provided by a SCALANCE X-200 and describes
how to configure with Web Based Management (WBM) and the Command Line Interface
(CLI).
Overview of the technical documentation of the IE Switches X-200
The technical documentation of the X-200 product line is divided into hardware and software
and can be found in the following documents:
●
PH SCALANCE X-200 configuration manual
Software description of the X-200 product line
●
SCALANCE X-200 BA Operating Instructions
Hardware description for all product groups and general information.
You will find the documents here:
● On the data medium that ships with some products:
– Product CD / product DVD
– SIMATIC NET Manual Collection
● On the Internet pages of Siemens Industry Online Support
(http://support.automation.siemens.com/WW/view/en/33118791/133300
).
Validity of this configuration manual
This manual is valid for the following firmware versions:
● SCALANCE X-200/XF-200 firmware version 5.1.0
● SCALANCE X-200IRT/XF-200IRT firmware version 5.2.0
● Primary Setup Tool as of version 4.2.0
● SNMP/OPC server as of version 6.2.1
According to the operating instructions SCALANCE X-200, this manual is valid for the
following product lines:
● SCALANCE X-200 and SCALANCE XF-200
● SCALANCE X-200IRT and SCALANCE XF-200IRT
To Next Page
Loading...
