Siemens SCALANCE X-200

Configuration using WBM and CLI
4.2 Command Line Interface
SCALANCE X-200
Configuration Manual, 03/2015, C79000-G8976-C285-06
45
Commands not dependent on menus
You can use the commands in the following table in any menu or submenu.
Table 4- 1 Command Line Interface - CLI\ … >
Com-
mand
Description
Comment
/
Changes to the highest menu level.
Administrator and User
.. Moves you one menu level higher. Administrator and User
?
Displays the commands available in the menu.
Administrator and User
exit
Closes the CLI session.
Administrator and User
restart
Restarts the IE switch
Administrator only
Info
Displays information on the current menu item.
Administrator and User