Siemens SCALANCE X-200

Menus in the WBM
5.1 The System menu
SCALANCE X-200
48 Configuration Manual, 03/2015, C79000-G8976-C285-06
Product Name
Displays the product name.
Device Type
Displays the device type.
System Contact
Enter the name of a contact person responsible for managing the device in this box.
System Location
In this box, you enter a location for the device, for example a room number.
System Name
Enter a description of the device in this box.
You apply your settings with Set Values.
Syntax of the Command Line Interface
Table 5- 1 System Configuration - CLI\SYSTEM>
Command
Description
Comment
info
Shows the current system information.
name [sysName] Sets the "sysName" variable. Administrator only
contact [sysContact]
Sets the "sysContact" variable.
Administrator only
location [sysLocation] Sets the "sysLocation" variable. Administrator only