Siemens SCALANCE X-200

Menus in the WBM
5.3 The Agent menu
SCALANCE X-200
Configuration Manual, 03/2015, C79000-G8976-C285-06
85
Syntax of the Command Line Interface
Table 5- 16 Agent SNMP Configuration - CLI\AGENT\SNMP>
Command
Description
Comment
info
Displays information on SNMP.
snmp [A | 3 | D] Enables either [A] all SNMP versions or [3] only SNMPv3
or [D] disables SNMP.
Administrator only
readonly
Enables / disables SNMPv1 read only mode.
Administrator only
getcomm [string] Specifies the Read Community string. Administrator only
setcomm [string]
Specifies the Write Community string.
Administrator only
traps [E | D]
Enables / disables SNMPv1 traps.
Administrator only.