Siemens SCALANCE X-200

Menus in the WBM
5.3 The Agent menu
SCALANCE X-200
Configuration Manual, 03/2015, C79000-G8976-C285-06
99
SMTP Server IP Port
The IP port over which the mail is sent. If necessary, you can change the default value 25 to
your own requirements in the CLI.
"From" Field
You can enter a text that appears in the "From" field of the E-mail.
Send Test E-Mail
Sends an E-mail with the selected parameters.
Syntax of the Command Line Interface
Table 5- 22 Agent E-Mail Configuration - CLI\AGENT\EMAIL>
Command
Description
Comment
info
Shows the E-mail configuration.
mail [E ¦ D] Enables/disables the mailing function. Administrator only
smtp [IP address] [:port] Specifies the IP address and the port number of
the SMTP server.
Administrator only
from [address] Specifies a text that will be entered in the "From"
field of the E-mail.
Administrator only
email [E-mail address] Specifies the address to which an IE switch
sends an E-mail. This address can be up to a
maximum of 50 characters long.
Administrator only
testmail <test E-mail com-
ment>
Sends an E-mail for testing. Administrator only