6 Security
6.2 Account Management
103SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019
✧ Edit the user account according to the following table:
✧ Click Confirm. The user account is edited successfully.
To delete an existing user account, proceed as follows:
✧ In the navigation window, select Administrative and click Account management.
✧ Click the icon to delete an existing user account.
✧ If you want to delete all the user accounts, click the button Delete all user accounts shown in Figure 6-6.
As a result, the device restarts automatically. The Log on tab with creating an initial user account opens
after the device restarts, shown in Figure 6-1.
Table 6-6 Settings for Editing a User Account
Settings Default Settings Description
User name Empty Up to 64 characters
New password 8 to 24 characters
Contains at least:
• 1 capital latin letter (A to Z)
• 1 small latin letter (a to z)
• 1 digital number (0 to 9)
• 1 special character from the set:
!, “, #, $, %, &, ‘, (, ), *, +, ,, -, ., /, :, ;, <, =,
>, ?, @, [, \, ], ^, _, ‘, {, }, ~.
Repeat new password
Roles
Click one or several option buttons to select a
role or several roles for a user account
according to Table 6-5.
NOTE
To edit a user account, you can choose to edit the password, the roles or both of the password and roles.
NOTE
If the roles for the users who have the permission to access Account management are changed, the users
must log off and log on again to make sure that the roles are updated.
MAN_SICAM_Q100_US.book Page 103 Wednesday, June 5, 2019 9:31 AM
To Next Page
Loading...
