EasyManua.ls Logo

Siemens SICAM Q100 7KG95 Series - Page 226

Siemens SICAM Q100 7KG95 Series
448 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9 Operation at Use of a PC
9.3 Configuration of the Device
226 SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019
communication to the OPC UA PubSub (MQTT) broker.
Figure 9-64 Upload Certificates
You can upload an archive file in PCKS#12 format (*.p12 file) and an associated *.pin file with the password.
The *.p12 file contains the following key and certificates:
The certificate of the CA which generates the client certificate and the private key
The client certificate
The client private key
The broker CA certificate must be uploaded as DER file (*.der) or as PEM file (*.pem).
The broker CA and the CA to generate the client certificate and the client private key can be different in the
following case:
You have your own Certificate Authority installed;
You use the installed Certificate Authority to generate the key material for the device.
The CA certificate in the *.p12 file may be empty in the following case:
The client certificate and the client private key are created from the cloud service provider;
The CA for generating the client key material is the same as the broker CA.
The information above the Upload certificates button indicates whether there is a certificate or not and shows
the
MAN_SICAM_Q100_US.book Page 226 Wednesday, June 5, 2019 9:31 AM

Table of Contents

Related product manuals