Siemens SICAM Q100 7KG95 Series - Page 352

10 Operation at Use of the Display
10.4 Parameterization
352 SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019
Submenu Display Number 80.5: Date/Time
Figure 10-23 Submenu Display Number 80.5, Date/Time
Table 10-5 Date/Time Settings
Parameter Default Setting Setting Range
Time source internal internal
Ethernet NTP
Fieldbus
Date Current date setting according to format
Format YYYY-MM-DD24 YYYY-MM-DD24
YYYY-MM-DD12
DD.MM.YYYY24
DD.MM.YYYY12
MM/DD/YY24
MM/DD/YY12
Time Current time setting according to format
Time zone 00:00 -12 to +13 (hours)
(in increments of 0.5 h)
80.5
Date/Time
80.5
Time source
Enter
80.5
Date
Edit
+
-
Edit
80.5
Format
Edit


Select parameters acc .
to following table.
Ok
80.5
Time
Edit
80.5
Time zone
Edit
Esc

MAN_SICAM_Q100_US.book Page 352 Wednesday, June 5, 2019 9:31 AM