Wiring
5.13 Inserting I/O modules / motor starters and BU covers
Distributed I/O system
System Manual, 12/2016, A5E03576849-AG
125
Plugging in I/O modules and BU covers
Watch video sequence: "Insert I/O modules"
(http://support.automation.siemens.com/WW/view/en/95886218)
Install the I/O module or BU cover parallel into the BaseUnit until you hear both latches click
into place.
Figure 5-32 Plugging in I/O modules or BU covers (using an I/O module as example)
To Next Page
Loading...
