Siemens Simantic ET200SP - Mounting;Disassembly of Motor Starters

Wiring
5.14 Mounting/disassembly of motor starters
Distributed I/O system
System Manual, 12/2016, A5E03576849-AG
127
5.14.2
Mounting/disassembly of motor starters
Procedure
CAUTION
Protection against electrostatic charge
When handling and installing the SIMATIC ET 200SP motor starter, ensure protection
against electrostatic charging of the components. Changes to the system configuration and
wiring are only permissible after disconnection from the power supply.
To assemble a SIMATIC ET 200SP motor starter, proceed as follows:
1. Set the mechanical rotary interlock of the SIMATIC ET 200SP motor starter to the
assembly/disassembly position.
2. Place the SIMATIC ET 200SP motor starter onto the BaseUnit.
3. Turn the mechanical rotary interlock clockwise to the parking position.