Maintenance
12.6 Firmware update
Distributed I/O system
System Manual, 12/2016, A5E03576849-AG
245
Firmware update
Introduction
During operation it may be necessary to update the firmware (e.g. to extend the available
functions).
Update the firmware of the CPU/interface module and the I/O modules using firmware files.
The retentive data is retained after the firmware has been updated.
● You have downloaded the file(s) for the firmware update from the Product Support
(https://support.industry.siemens.com/cs/ww/en/ps) web page.
On this web page, select:
– Automation Technology > Automation Systems > Industrial Automation Systems
SIMATIC > SIMATIC ET 200 I/O Systems > ET 200 systems for the cabinet >
ET 200SP.
Figure 12-4 ET 200SP in the product tree
To Next Page
Loading...
