Application planning
3.1 Selecting the BaseUnit for I/O modules
Distributed I/O system
System Manual, 12/2016, A5E03576849-AG
35
Additional information on the functional assignment of the terminals and on the associated
BaseUnits can be found in one of the following manuals:
● Manual for the relevant I/O module
(http://support.automation.siemens.com/WW/view/en/55679691/133300)
● Manual BaseUnits (http://support.automation.siemens.com/WW/view/en/59753521)
● Motor starter (https://support.industry.siemens.com/cs/ww/en/view/109479973) manual
To Next Page
Loading...
