Measured value data records
E.2 Measured value data record for base measurements (DS 142)
Analog input module AI Energy Meter 480VAC/CT HF (6ES7134-6PA00-0CU0)
228 Manual, 07/2018, A5E42674880-AA
9
9
94...97 Total reactive power Qtot L1L2L3 REAL var -3.0 x 10
9
… +3.0 x 10
9
38
9
9
102...105 Active power L2 REAL W -3.0 x 10
9
… +3.0 x 10
9
14
9
9
Total active power L1L2L3
9
9
Total apparent energy L1L2L3
38
Total reactive energy L1L2L3
38
38
Total active energy L1L2L3
38
38
Total reactive energy inflow L1L2L3
38
Total reactive energy outflow L1L2L3
38
Total active energy inflow L1L2L3
38
Total active energy outflow L1L2L3
38
Total apparent energy L1L2L3
308
Total reactive energy L1L2L3
308
308
Total active energy L1L2L3
308
308
Total reactive energy inflow L1L2L3
308
186...193 Total reactive energy outflow L1L2L3 LREAL varh 0.0 ... 1.8 x 10
308
213
Total active energy inflow L1L2L3
308
Total active energy outflow L1L2L3
308
If you operate the AI Energy Meter HF with connection type 3P4W, 3P4W1 or 3P3W, the
neutral current is also calculated under the following conditions:
● Transmission factors of all phase currents (primary and secondary currents) are identical.
● Measured phase currents are greater than the value of the "Low limit for measuring
current parameter.
● The parameter "Reverse current direction" must be the same on all phases.
If one of the conditions is not met, 0 is entered as the value for the neutral current. You can
read the neutral current calculated using measured value data record 142.
To Next Page
Loading...
Need help?
General
