Siemens SIMATIC ET 200SP User Manual

Analog input module AI Energy Meter 480VAC/CT HF (6ES7134-6PA00-0CU0)
54 Manual, 07/2018, A5E42674880-AA
Energy counters
7
Introduction
The AI Energy Meter HF provides several energy and overflow counters that detect both
line-based and phase-based energy values, e.g.:
● Active energy (total, outflow, inflow)
● Reactive energy (total, outflow, inflow)
● Apparent energy (total)
Retentivity
The AI Energy Meter HF stores all counter values retentively. After an interruption
(e.g. Power System Off), the energy counting resumes with the retentively stored values.
Functions
The energy meters provide the following basic functions:
● Measured values for infinite and periodical counting can be read out
End values for periodic counting: 10
3
, 10
6
, 10
9
, 10
12
and 10
15
can be selected with
overflow counters
● Measuring ranges can be changed in RUN
● Starting and stopping counters via gate is possible
● Preset and apply start values in RUN
● Measured variables can be evaluated via data records and user data.

Siemens SIMATIC ET 200SP Specifications

General

System Type	Distributed I/O System
Mounting	DIN Rail
Communication Protocol	PROFINET, PROFIBUS
IP Rating	IP20
Category	I/O Systems
Supply Voltage	24 V DC
Modularity	Yes
Hot Swapping	Yes
Storage Temperature	-40°C to +70°C
Digital Inputs	Yes
Digital Outputs	Yes
Analog Inputs	Yes
Analog Outputs	Yes
Communication Interface	PROFINET, PROFIBUS
Number of Modules	Up to 64
Relative Humidity	5 to 95% (non-condensing)
Operating Temperature	-25°C to +60°C