Siemens SIMATIC ET 200SP User Manual

Reading and processing measured values
6.2 Quality information
Analog input module AI Energy Meter 480VAC/CT HF (6ES7134-6PA00-0CU0)
46 Manual, 07/2018, A5E42674880-AA
6.2.2
Quality information with measured value IDs
Complete quality information is provided by the module in a 16-bit field with measured value
IDs 65500 to 65503.
● Measured value ID 65503 for 3-phase measurement
● Measured value ID 65500, 65501 or 65502 for phase-specific measurement in phase 1,
phase 2 or phase 3
Quality information with measured value ID 65503 for 3-phase measurement
The quality information for 3-phase measurement is provided by the module with:
● User data variant "Basic variables quality values three-phase measurement (ID 240 or
F0
H
)
● User data (measured value ID 66503)
● Measured value data record 150
The measured value ID 65503 provides information on:
● Currents (I
L1
, I
L2
, I
L3
)
● Voltages (U
L1
, U
L2
, U
L3
)
● Operating quadrants for all 3 phases
● Rotating field for the 3-phase system

Siemens SIMATIC ET 200SP Specifications

General

System Type	Distributed I/O System
Mounting	DIN Rail
Communication Protocol	PROFINET, PROFIBUS
IP Rating	IP20
Category	I/O Systems
Supply Voltage	24 V DC
Modularity	Yes
Hot Swapping	Yes
Storage Temperature	-40°C to +70°C
Digital Inputs	Yes
Digital Outputs	Yes
Analog Inputs	Yes
Analog Outputs	Yes
Communication Interface	PROFINET, PROFIBUS
Number of Modules	Up to 64
Relative Humidity	5 to 95% (non-condensing)
Operating Temperature	-25°C to +60°C