Product overview
2.2 Area of application
Analog input module AI Energy Meter 480VAC/CT HF (6ES7134-6PA00-0CU0)
16 Manual, 07/2018, A5E42674880-AA
The following accessories must be ordered separately:
● BaseUnit type U0
● Labeling strips
● Reference identification label
You can find additional information on the accessories in the ET 200SP distributed I/O
system (http://support.automation.siemens.com/WW/view/es/58649293
) system manual.
Area of application
Introduction
Energy efficiency is playing an increasingly important role in industry. Rising energy prices,
increasing pressure to improve profitability and the growing awareness of climate protection
are important factors for reducing energy costs and for introducing an energy data
management system.
Where can you use the AI Energy Meter HF?
AI Energy Meter HF is designed for machine-level deployment in an ET 200SP distributed
I/O system. AI Energy Meter HF records over 500 different electrical measurement and
energy values. It lets you create transparency about the energy requirements of individual
components of a production plant even down to the machine level.
You can use the following measurement values supplied by the AI Energy Meter HF for the
following applications:
● Energy consumption
● Power consumption
● Power quality
● Forecasts of consumption
● Efficiency
Power consumption measurements are relevant for load management and maintenance. In
addition, you can use the measurements for emission reporting and for determining the CO
2
footprint.
Note
Measuring dangerous electrical quantities
The AI Energy Meter HF is not tested according to DIN EN 61010
-2-030 and may therefore
not be used to verify, measure or monitor protective mea
sures according to DIN EN 61557.
Qualified personnel must ensure through additional measures that no danger ensues for
humans and the environment in case of an incorrect display.
To Next Page
Loading...
Need help?
General
