Siemens SIMATIC ET 200SP User Manual

Reading and processing measured values
6.2 Quality information
Analog input module AI Energy Meter 480VAC/CT HF (6ES7134-6PA00-0CU0)
48 Manual, 07/2018, A5E42674880-AA
Quality information with measured value ID 65500, 65501 or 65502 for phase-specific
measurement
The module provides quality information for phase-specific measurement in phase 1, phase
2 or phase 3 with:
● User data (with measured value ID 65500, 65501 or 65502)
● Measured value data record DS 147, 148 or 149
Measured value IDs 65500, 65501 and 65502 provide information on:
● Current of the phase in question
● Voltage of the phase in question
● Operating quadrant of the phase in question
In contrast to the assignment for measured value ID 65503 (figure above), measured value
IDs 65500, 65501 and 65502 only contain the phase-specific information for current, voltage
and operating quadrant. The information about the other phases and the rotating field have
the value 0.

Siemens SIMATIC ET 200SP Specifications

General

System Type	Distributed I/O System
Mounting	DIN Rail
Communication Protocol	PROFINET, PROFIBUS
IP Rating	IP20
Category	I/O Systems
Supply Voltage	24 V DC
Modularity	Yes
Hot Swapping	Yes
Storage Temperature	-40°C to +70°C
Digital Inputs	Yes
Digital Outputs	Yes
Analog Inputs	Yes
Analog Outputs	Yes
Communication Interface	PROFINET, PROFIBUS
Number of Modules	Up to 64
Relative Humidity	5 to 95% (non-condensing)
Operating Temperature	-25°C to +60°C