Siemens SIMATIC ET 200SP User Manual

Phase-based measured values
Analog input module AI Energy Meter 480VAC/CT HF (6ES7134-6PA00-0CU0)
Manual, 07/2018, A5E42674880-AA
95
Measured value data records
Through the measured value data records DS 142, DS 147, DS 148 and DS 149 you can
evaluate the following measured values for each phase of an AC / three-phase network:
● Quality information
● Current and voltage
● Minimum current and minimum voltage
● Maximum current and maximum voltage
● Active, reactive and apparent power
● Minimum active, reactive and apparent power
● Maximum active, reactive and apparent power
● Active, reactive and apparent energy
● Power factor
● Minimum power factor
● Maximum power factor
● Harmonic distortion for voltage and current including minimum/maximum values
● Voltage dip
● Voltage swell
● Peak value for voltage and current
● Overcurrent value
You can find the structure of the measured value data records in appendix Measured value
data record for phase-based measured values L1 (DS 147) version 1 (Page 249).
See also
Measured value data record for phase-based measured values L2 (DS 148) version 1
(Page 252)
Measured value data record for phase-based measured values L3 (DS 149) version 1
(Page 255)
Minimum and maximum values (Page 84)
Overview of all measured value data records (Page 226)

Siemens SIMATIC ET 200SP Specifications

General

System Type	Distributed I/O System
Mounting	DIN Rail
Communication Protocol	PROFINET, PROFIBUS
IP Rating	IP20
Category	I/O Systems
Supply Voltage	24 V DC
Modularity	Yes
Hot Swapping	Yes
Storage Temperature	-40°C to +70°C
Digital Inputs	Yes
Digital Outputs	Yes
Analog Inputs	Yes
Analog Outputs	Yes
Communication Interface	PROFINET, PROFIBUS
Number of Modules	Up to 64
Relative Humidity	5 to 95% (non-condensing)
Operating Temperature	-25°C to +60°C