Siemens SIMATIC HMI IPC677C User Manual

Operation
9.2 Device with key panel
SIMATIC HMI IPC677C
102 Operating Instructions, 04/2013, A5E02722710-04
Enter special characters, arithmetic signs and signs
Special characters, arithmetic signs and signs are also assigned to most of the alphanumeric
and numeric keys. These signs are indicated by white symbols on the top left of the keys. To
enter such a sign, proceed as follows:
1. Hold down the <F
N
> control key.
2. Activate the desired alphanumeric or numeric key at the same time. The displayed
special character, arithmetic sign or signs will be entered.
3. To enter the signs of the pre-defined assignment again, release the <F
N
> key.
9.2.3.3 Cursor keys
Navigate, scroll or move the writing mark using the cursor keys. The cursor keys correspond
to the usual keys of the PC keyboard.







(1) <Left> key
(2) <Up> key
(3) <Right> key
(4) <Down> key
(5) Position 1 key (Home)
(6) <Page up> key
(7) <Page down> key
Figure 9-4 Cursor keys

Siemens SIMATIC HMI IPC677C Specifications

General

Brand	Siemens
Model	SIMATIC HMI IPC677C
Category	Industrial PC
Language	English