Siemens SIMATIC HMI IPC677C - Starting BIOS Setup

Detailed descriptions
16.4 BIOS-Setup
SIMATIC HMI IPC677C
222 Operating Instructions, 04/2013, A5E02722710-04
16.4.2 Starting BIOS Setup
Starting BIOS Setup
Start the setup program as follows:
1. Reset the device (warm or cold restart).
In the figures shown, the default settings differ based on the device versions. With the
default setting of the Box PC, the display shown below appears following power-on, for
example:
On completion of the POST, the BIOS gives you the opportunity of starting the SETUP
program. The following message appears on the screen:
–
Press F2 go to Setup Utility
–
Press F12 go to Boot Manager
2. Press the F2 key while the BIOS prompt appears on the screen.