Siemens SIMATIC HMI IPC677C - Technical Features of the Motherboard

Detailed descriptions
16.1 Motherboard
SIMATIC HMI IPC677C
196 Operating Instructions, 04/2013, A5E02722710-04
16.1.2 Technical features of the motherboard
Component /
interface
Description Characteristics
Chip set Single chip set
• Mobile Intel® QM57 Express Chipset
BIOS Update by means of software
• InsideH20 Setup Utility
Rev. 3.x
CPU
• Intel® Celeron P4505 1.86 GHz
• Intel® Core i3-330E 2.13 GHz
• Intel® Core i7-610E 2.53 GHz
• 2 MB second-level cache, 2 cores /
2 threads, virtualization
• 3 MByte second level cache, 2 cores
/4 threads, hyperthreading, virtualization
• 4 MB second-level cache, 2 cores
/4 threads, hyper-threading, turbo boost,
virtualization, AMT
Memory 2 sockets maximum 4 GB SDRAM
DDR3
• 64-bit/72-bit data bus width (without
ECC / with ECC)
• 3.3 V
• SDRAM DDR3 in accordance with PC3-
8500 specifications
Graphics integrated in chip set
• Onboard Intel® Graphics Media
Accelerator HD Graphics Controller
2-D and 3-D engine integrated in chipset
• Dynamic Video Memory Technology
(uses up to 256 MB of RAM)
• CRT:
Max. 1280x1024 at 100 Hz / 32-bit color
depth
Max. 1600x1200 at 60 Hz / 32-bit color
depth
Maximum resolution:
2038x1536 at 75 Hz / 16-bit color depth
• LCD via DVI-I: 1600x1200 at 60 Hz / 32-
bit color depth
Hard disk 2 channels, Serial ATA 3.5" / 2.5" serial ATA, see ordering
documentation for the hard disk capacity
• - 3 Gbps data transmission rate
- supports NCQ (Native Command
Queuing;
SATA II property)
CompactFlash card Flash memory
Solid-state drive
RAID Onboard Serial ATA
• Intel BD82QM57
RAID 0, 1, 0+1
DVD Burner
3
connection, Serial ATA
• UDMA-capable, ATA33