Siemens SIMATIC HMI IPC677C - Installing;Removing an Additional Compact Flash Card

Service and maintenance
11.7 Expansion and parameter assignment
SIMATIC HMI IPC677C
Operating Instructions, 04/2013, A5E02722710-04
135
Removing the Compact Flash card
How to remove a Compact Flash card
1 Open the board slot.
2 Press the eject button, for example
with the cover of the module slot, and
remove the Compact Flash card.
3 Open the module slot.
11.7.6 Installing/removing an additional Compact Flash card
Note
We highly recommend that use use approved SIMATIC Compact Flash cards. Siemens
disclaims any liability for impairment of functions caused by the use of third-party cards.
Preparation
Disconnect the device from the mains.
Note
The use of the Compact Flash adapter excludes the simultaneous use of a hard disk.