SIMATIC HMI IPC677C
Operating Instructions, 04/2013, A5E02722710-04
3
Preface
Purpose of this manual
These operating instructions contain all the information you need for commissioning and
operating the SIMATIC IPC677C.
It is intended both for programming and testing personnel who commission the device and
connect it with other units (automation systems, programming devices), as well as for service
and maintenance personnel who install add-ons or carry out fault/error analyses.
Basic knowledge required
A solid background in personal computers and Microsoft operating systems is required to
understand this manual. General knowledge in the field of automation control engineering is
recommended.
Scope of this manual
This manual applies to devices with order numbers 6AV789….
Approvals
For more information, please refer to the chapter "Certificates and Guidelines" in the
appendix.
CE marking
For more information, please refer to "Directives and Declarations" in the "Certificates and
Guidelines" section of the appendix.
Standards
Please refer to sections "Application planning" and "Technical data".
Position in the information landscape
The documentation for the Panel PC includes the following sections:
● SIMATIC HMI IPC677C, Operating Instructions (compact), with the following information:
– Commissioning
– Legal information
● SIMATIC HMI IPC677C, Operating Instructions
The documentation is supplied with the Panel PC in electronic form as a PDF file on the
"Documentation and Drivers" CD. The documentation is available in German, English,
French, Italian, Spanish, and Chinese.
To Next Page
Loading...
Need help?
General
